HYDRAULIC HM 10
A mineral oil, specifically designed to meet the requirements of the most important manufacturers of hydraulic equipment. It contains anti-wear, anti-oxidant, anti-corrosion and anti-foam additives. |
||
Performance level
- AFNOR: NF E 48-603 HM
- AFNOR: NF E 48-690
- AFNOR: NF E 48-691
- DENISON: HF-2
- DIN: 51524 Part 2 HLP
- EATON VICKERS: I-286-S
- EATON VICKERS: M-2950-S
- ISO: 11158, HM
- ISO: 6743-4, HM
Applications
This oil is specifically designed to satisfy the requirements of the manufacturers of hydraulic systems where the highest demands are made concerning high pressure, temperatures or speeds. It is recommended for the hydraulic systems of the following types : Vickers, Gerotor, Gresen, HPM, Denison, Cessna, Hydreco and Worthington. It is also suitable for the lubrication of workshop equipment, reducing gears, bearings, compressed air systems and air screw compressors.
Characteristics
| Unit | Average Value | |
|---|---|---|
| Density at 15°C | g/ml | 0.888 |
| Viscosity 40°C | mm²/s | 10.0 |
| Viscosity 100°C | mm²/s | 2.6 |
| Viscosity index | 90 | |
| Flash point COC | °C | 172 |
| Pour point | °C | -30 |
| Acidity | mgKOH/g | 0.30 |
| Sulphated ash content | % | 0.06 |
